Clipper Marine Yacht Sales

Beneteau Oceanis 37 - €78,000 (Ex VAT)

Michael Heinig - +34 654 681 085

Beneteau Oceanis 37 - €78,000 (Ex VAT)

Beneteau Oceanis 37 : Manufacturer Provided Image
Beneteau Oceanis 37 : Manufacturer Provided Image

Details

Name: 'Summer Time'
Builder: Beneteau
Hull Material: Fiberglass
Location: Mallorca, Spain

Dimensions

LOA: 36'5" (11.1m)
Beam: 3.89 meter
Displacement: - -
Max Draft: 1.88 meter

Engine

Make / Fuel: Yanmar diesel
HP: -
Cruising Speed: - -
Max Speed: - -

Tankage

Fuel: 130 liter
Water: 361 liter
Holding: - -
   

2010 Beneteau Oceanis 37 - €78,000 (Ex VAT)

Beneteau 37 Oceanis 3 cabin version. 

Sail Area



I : 45.75 ft
J : 14.75 ft
P : 43.33 ft
E : 12.58 ft

Descripción proporcionada por fabricante


Handsome and well thought-out, the Océanis 37 follows in the footsteps of its bigger brothers, with a contemporary belowdecks interior by Nauta Design and clean dynamic external lines by Groupe Finot Conq. Innovation dominates the design of this exceptional new boat, which takes the principle of design serving function to a completely new level.

Additional Description


  • Cockpit bottom self bailing in polyester
  • 1 Wet locker to port (Life raft storage, Gas box 2 bottles)
  • 1 Starboard locker (Sail locker)
  • 1 Locker next to tiller seat to starboard
  • Cockpit benches decked in natural solid wood
  • 1 Steering wheel console: Leather covered steering wheel ( 1100 mm diameter) - 1 Rudder system on column - 1 metal cable transmission system - 1 Stainless steel guard rail - navigation instrument stand (optional instruments) - 1 Compass on binnacle
  • Engine control - Control panel to starboard
  • 1 Deck hole for access to tiller system - 1 Emergency tiller
  • Companionway hatch and door in PMMA

Additional Description


FITTINGS
  • Alpi woodwork in fruit tree colour
  • Parquet type laminated floors
  • Hull spar ceilings in cabins + in the saloon
COMPANIONWAY
  • Height to deck beam: 1.93 m
  • Companionway and steps in polyester
  • 2 Stainless steel guardrails (Version 2 aft cabin(s)) - 1 Stainless steel guardrails (Version 1 aft cabin(s))
  • 1 Fixed zenital window with curtain
FORWARD CABIN
  • Height to deck beam: 1.91 m
  • Central double bed (2.10 m x 0.42 m x 1.87 m), Marine mattress
  • Hanging locker - shelves - Cubby hole lockers - Storage - Dressing table
  • 1 Removable seat
  • 1 Opening hatch(es) with curtain
SALOON
  • Height to deck beam: 1.92 m
  • U shaped saloon bench to port, double density foam
  • 1 Starboard bench seat
  • 4 Matching decorative cushions
  • Saloon table with wooden mounting
  • Cubby hole lockers - Storage space along the hull - Bar storage space - Storage under bench seats
  • 1 Port side window with curtain
  • 1 Starboard side window with curtain
  • 2 opening porthole in side window - To port
  • 1 opening porthole in side window - To starboard
  • 2 Hull portholes with curtain
  • 1 Opening deck hatch(es) with curtain

Additional Description


  • 12V circuit
  • 1 service batteries 110 Amperes (Port aft cabin)
  • 1 Battery for engine 70 Amperes (Port aft cabin)
  • 1 Charge divider
  • Electrical panel 12 V (Fuses - Voltmeter - 1 Water gauge - 1 Fuel gauge - 1 Low battery charge warning - 1 Low diesel and water tank warning)
  • 1 Socket(s)12 V
  • Lighting: 1 Fluorescent lamp White, Halogen ceiling lights, 1 White/red light fitting
  • Navigation lights: 1 navigation light(s)fore and aft - 1 Engine navigation light / Crosstree light forward of mast - 1 Mooring light on masthead
  • Wire runs for options cables

Additional Description


  • Height to deck beam: 1.92 m
  • L-shaped kitchen
  • White laminated worktop
  • 2 Rectangular stainless steel sinks
  • 1 Mixer tap cold water / hot under pressure
  • 1 2 hob gas cooker on mounting - 1 safety bar
  • 1 Refrigerator 110 litre front opening - Refrigeration unit 12 V
  • 1 Dresser with drain system - Closure / Cutting board
  • Cupboard - Fitted storage space and lockers
  • 1 Rubbish bin
  • 1 Porthole opening onto coamimg in side window

Additional Description


  • Engine Yanmar Diesel 29 hp
  • Engine control - fitted in cockpit
  • Engine compartment: Soundproofing foam - Ventilation: 1 air intake and 1 pressured air outlet
  • 1 ALTERNATOR 12 V / 80 Ah
  • 1 Rotation moulded diesel tank 130 L (under starboard aft berth) - Electronic gauge - Low level alarm - 1 Deck filler
  • Filters: Sea water - Diesel - Decanter
  • Stainless steel shaft line - Polyester guard moulded into hull
  • Fixed three blade propeller
  • 1 Engine access through companionway (opening with 2 gas pistons)
  • 2 Engine access through aft cabins (3 cabin version) or in the washroom and the aft cabin (2 cabin version)

Additional Description


  • Design made following European Directive requirements and according to EC certification
  • Monolithic hull design in polyester
  • Monolithic structural counter moulding laminated and stuck to hull
  • Deck in balsa and glass fibre sandwich covered in «diamond point» type non-slip surface
  • Deck hull join screwed, stuck and banded with 1 soild wood bulwark, screwed
  • Cast iron keel fixed with bolts and stainless steel veneer and stuck
  • Hung rudder with stainless steel stock
  • White coloured hull - Hull decorated in pearl grey

Additional Description


RIGGING

  • Standard mast 9/10 electro-polished aluminium installed on the deck, 2 level(s) of advanced cross trees
  • Boom in anodised aluminium
  • Standing rigging in single-strand stainless steel (Forestay, Shrouds, Lower shroud, Backstay)
  • 2 Backstays with turnbuckles
  • 1 Forestay Classical
  • 1 Rigid boom down-haul with tackle
  • 1 Genoa furling system with drum on the deck
  • 1 Mainsail sheet track
  • 2 genoa sheet tracks with piston adjusted traveller cars - 2 Genoa sheet return blocks
  • Rigging run back to cockpit (except boom topping lift - Foot tuning line)
  • Complete running rigging: 1 Main halyard - 1 genoa halyard with clutch on mast and cleat - Boom topping lift with cleat on mast - 1 Mainsail foot - 1 Main sheet on traveller - 2 Genoa sheets - 2 fast reefing ropes
  • 5 clutches to port
  • 3 Bollards

WINCHES

  • 2 Self-tailing genoa sheet winches (H46.2 STC)
  • 1 Rigging winch self tailing on deck house port side (H35.2 STC)
  • 1 Winch handle aluminium
  • 1 Winch handle box

SAILS

  • 1 Furling genoa with UV protective strip
  • 1 Furling mainsail

MOORING -ANCHORING

  • Self-bailing chain locker - Clench bolt - Hatch cover
  • 1 Stainless steel bow fitting - 1 Stem roller
  • Mechanically welded stainless steel roller
  • 6 Aluminium mooring cleats - Stainless steel deck line protection

Disclaimer

Clipper Marine offer the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information, nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.