Clipper Marine Yacht Sales

Beneteau Oceanis 34 - €72,000 (Ex VAT)

Michael Heinig - +34 654 681 085

Beneteau Oceanis 34 - €72,000 (Ex VAT)

Details

Name: 'Samba'
Builder: Beneteau
Hull Material: Fiberglass
Location: Mallorca, Spain

Dimensions

LOA: 33'9" (10.29m)
Beam: 3.61 meter
Displacement: 5700 kilogram
Max Draft: 1.78 meter

Engine

Make / Fuel: Yanmar diesel
HP: -
Cruising Speed: - -
Max Speed: - -

Tankage

Fuel: 130 liter
Water: 290 liter
Holding: - -
   

2011 Beneteau Oceanis 34 - €72,000 (Ex VAT)

Very well equipped charter Beneteau Oceanis 34 in very good conditions Beneteau Oceanis 34 proveniente de charter en muy buen estado  

Sail Area



I : 42.25 ft
J : 13.58 ft
P : 39.58 ft
E : 12.58 ft

Descripción proporcionada por fabricante


Whether you sail as a family, a couple or with friends, this yacht is a dream for everyone who loves to get away from it all. With its welcoming, light-filled living space, life is good aboard the Océanis 34. The Finot-Conq design keeps its promise of maximum performance from this elegant thoroughbred cruiser.

Additional Description


  • Self-draining cockpit in polyester
  • 1 Wet locker to port (Life raft storage, Gas box 2 bottles)
  • 1 Starboard locker (Sail locker)
  • 1 Locker next to tiller seat to starboard
  • Natural solid wood slatted cockpit benches
  • 1 Steering wheel console: Leather covered steering wheel (900 mm diameter) - 1 Rudder system on column - 1 metal cable transmission system - 1 Stainless steel guard rail - navigation instrument stand (optional instruments) - 1 Compass on binnacle
  • Engine control - Control panel to starboard
  • 1 Deck hole for access to tiller system - 1 Emergency tiller
  • Companionway hatch and door in PMMA

Additional Description


INTERIOR

  • Woodwork Alpi Mahogany
  • Parquet type laminated floors
  • Hull spar ceilings in cabins and saloon
  • Fabric upholstery

COMPANIONWAY

  • Headroom: 1.88 m
  • Companionway and steps in polyester
  • 2 Stainless steel guardrails (Version 2 aft cabin(s)) - 1 Stainless steel guardrails (Version 1 aft cabin)
  • 1 Fixed zenital window with curtain
  • Perfection Ivory Cushions (Saloon)

FORWARD CABIN

  • Headroom: 1.77 m
  • Central double bed (2.05 m x 1.80 m x 0.35 m) - 1 Marine mattress
  • Double cupboard (Hanging locker - Shelf) - Cubby hole lockers - Storage
  • 1 Opening hatch with curtain

SALOON

  • Headroom: 1.84 m
  • U shaped saloon bench to port, double density foam
  • 1 Starboard bench seat
  • 4 Matching decorative cushions
  • Saloon table with wooden mounting
  • Cubby hole lockers - Bar storage space - Storage space along the hull - Storage under bench seats
  • 1 Port side window with curtain
  • 2 opening porthole in side window To port
  • 1 Starboard side window with curtain
  • 2 opening porthole in side window To starboard (2 cabin version)
  • 1 opening porthole in side window To starboard (3 cabin version)
  • 2 Hull portholes with curtain
  • 1 Opening deck hatch with curtain

Additional Description


  • 12V circuit
  • 1 service batteries 70 Amperes - 1 Battery for engine 70 Amperes
  • 1 Charge divider
  • Electrical panel 12 V (Fuses - Voltmeter - 1 Water gauge - 1 Fuel gauge - 1 Low battery charge warning - 1 Low diesel and water tank warning)
  • 1 Cigar lighter socket 12 V
  • Lighting: Fittings blanks - Halogen ceiling lights - 1 White/red light fitting
  • Navigation lights: 1 Three-colour lights on masthead - 1 Fire bicolor half-mast
  • Wire runs for options cables

Additional Description


  • Headroom: 1.85 m
  • L-shaped kitchen
  • White laminated worktop
  • 2 Rectangular stainless steel sinks
  • 1 Mixer tap cold water / hot under pressure
  • 1 2 hob gas cooker on mounting - safety bar
  • 1 Refrigerator 110 litre front opening - Refrigeration unit 12 V
  • 1 Dresser with drain system - Closure / Cutting board
  • Cupboard - Fitted storage space and lockers
  • 1 Rubbish bin
  • 1 Porthole opening onto coamimg in side window

Additional Description


  • Engine Yanmar Diesel 21 hp
  • Engine control - fitted in cockpit
  • Engine compartment: Soundproofing foam - Ventilation: 1 air intake and 1 pressured air outlet
  • 1 Alternator coupled to engine (60 Amperes)
  • 1 Rotation moulded diesel tank 130 L (under starboard aft berth) - Electronic gauge - Low level alarm - 1 Deck filler
  • Filters: Sea water - Diesel - Decanter
  • Stainless steel shaft line - Polyester guard moulded into hull
  • Fixed three blade propeller
  • 1 Engine access through companionway (opening with 2 gas pistons)
  • 2 Engine access through aft cabin

Additional Description


  • Design made following European Directive requirements and according to EC certification
  • Monolithic hull design in polyester
  • Monolithic structural counter moulding laminated and stuck to hull
  • Deck in sandwich (glass fibre and balsa wood) - Diamond tip type non-slip covering
  • Deck hull join screwed, stuck and banded with 1 soild wood bulwark, screwed
  • Cast iron keel fixed with bolts and stainless steel veneer and stuck
  • Hung rudder with stainless steel stock
  • White coloured hull - Hull decorated in pearl grey

Additional Description


RIGGING

  • Standard mast 9/10 electro-polished aluminium installed on the deck, 2 level(s) of advanced cross trees
  • Anodised aluminium boom
  • Discontinuous stainless steel standing rigging (Forestay - Side shrouds - Backstay)
  • 2 Backstays with turnbuckles
  • 1 Standard fore stay
  • 1 Rigid boom down-haul with tackle
  • 1 Genoa furling system with drum on the deck
  • 2 Mainsail sheet bolts
  • 2 genoa sheet tracks with piston adjusted traveller cars - 2 Genoa sheet return blocks
  • Rigging run back to cockpit (except boom topping lift - Foot tuning line)
  • Complete running rigging: 1 Main halyard - 1 Genoa halyard with clutch on mast and cleat - 1 Boom topping lift with cleat on mast - 1 Mainsail foot - 1 Main sheet - 2 Genoa sheets - 2 fast reefing ropes
  • 5 clutches to port
  • 3 jamming cleats

WINCHES

  • 2 Self-tailing genoa sheet winches (H40.2 STC)
  • 1 Rigging winch self tailing on deck house port side (H35.2 STC)
  • 1 Winch handle aluminium
  • 2 Winch handle boxes

SAILS

  • 1 Furling genoa with UV protective strip
  • 1 Furling mainsail

MOORING -ANCHORING

  • Self-bailing chain locker - Clench bolt - Hatch cover
  • Single roller stainless steel bow fitting
  • Mechanically welded stainless steel roller
  • 6 Aluminium mooring cleats - Stainless steel deck line protection

Disclaimer

Clipper Marine offer the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information, nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Apply for a Finance Quotation with CGI